EMI Moorings
Pricing page two

    D)  MOORING ANCHORING SYSTEMS  (FOR SOLID SUBSTRATE)

    HALAS-SYSTEM

    E) MOORING ANCHORING SYSTEMS (FOR SOFT SUBSTRATE - SAND/RUBBLE)

    MANTA  RAY  MARINE MOORING ANCHORS

    Heavy duty,  includes custom one piece 7-foot x 1-inch  anchor rod with forged eye-nut.

    (These prices do not include inland shipping- Plz Call/email EMI)
    MANTA  RAY  INSTALLATION EQUIPMENT
    F) HYDRAULIC INSTALLATION EQUIPMENT, PRICED  INDIVIDUALLY
    G) INSTALLATION EQUIPMENT PACKAGE PRICES

    Note : The following equipment packages are for systems for vessels up to 30 ft

    - HALAS-SYSTEM INSTALLATION SET
    - MANTA RAY SYSTEM INSTALLATION SET
    - COMBINED STANDARD (HALAS/MR) INSTALLATION SET
    - COMBINED (TOTAL) INSTALLATION SET














All the specified components of the Environmental Mooring Buoy Systems make up a unique combination of
materials that are necessary for the moorings to function safely with a minimum amount of maintenance in the
marine environment.  With over ten years of experience and modifications to bring the system to the present
state of the art, the materials have been selected with safety, strength, and economy in mind.
Item
 Price in US $
MR-SRM    (Wt. 42.5 lbs.)
 $ Call/email EMI
MR-1M      (Wt. 33.5 lbs.)
 $ Call/email EMI
MR-2M      (Wt. 31.5lbs.)
 $ Call/email EMI
MR-3M      (Wt. 12.5 lbs.)
 $ Call/email EMI
Item
 Description
 Price in US $
MOORING ANCHOR EYE
 standard,  5/8-inch  316  stainless
steel,  18-inch depth.
(Use with cement in limestone.)
 $ Call/email EMI
MOORING  ANCHOR EYE
 5/8-inch 316 stainless steel, 18-inch
depth,  knurled or threaded.
(Use with epoxy in hard rock.)
 $ Call/email EMI
"U" ANCHOR  HEAVY DUTY MOORING
 3/4-inch, stainless steel, 24-inch
depth,   12-inch interior width
 $ Call/email EMI
Item
 Description
 Price in US $
SGC-18
 "Stinger" drive gad set, 1-1/8" shank,  
3 couplers, 2 extensions, 1 radiused
drive tip, gad extractor bar
 $ Call/email EMI
LL-1M
 Load locker ram assembly (used to
"toggle or "load" test MANTA RAY
Anchors)
 $ Call/email EMI
Item
 Description
 Price in US $
HYDRAULIC POWER UNIT
 Marinized with aluminum frame, 16 hp Briggs &
Stratton engine, gasoline, portable, runs
installation equipment.
 $ Call/email EMI
HYDRAULIC HOSES
 dual 125 ft. power and return with stainless steel
couplers
 $ Call/email EMI
HYDRAULIC COUPLERS
     Stainless steel, 1/2-inch male/female
 $ Call/email EMI
DL-09  STANLEY HYDRAULIC DRILL
 w/hose whips, fittings
 $ Call/email EMI
STANLEY HD-45 U/W Hammer drill
 w/hose whips, fittings
 $ Call/email EMI
BR-67  STANLEY HYDRAULIC
HAMMER
 for Manta Ray inst.
 $ Call/email EMI
2-CB
 2-Inch Carbide tipped coring barrel- 24" length
 $ Call/email EMI
3/4 DB
 3/4 Inch Carbide drill bit (5/8-11) - 27" length
 $ Call/email EMI
HD-45
 drill steel and adaptor
 $ Call/email EMI
ADAPTOR
 to fit 5/8"x16 male thread on drill to drill bit or core
barrel
 $ Call/email EMI
SPECIAL
 3/4 DB (above) WITH ADAPTOR
 $ Call/email EMI
INSTALLATION TOOL KIT
 Two 100 lb. Lift bags, U/W tool bag, pipe
wrenches, hammer, rod, lines w/snaps, mixing
bowls w/lids, marking tape, etc.

(Price depends on content/needs of project)
 $ Call/email EMI
Item
 Content
 (List Price)
 Set Price
Very Hard Bottom Set
     HYDRAULIC POWER UNIT, HYDRAULIC
HOSES, STANLEY HD-45 U/W Hammer drill,
HD-45, ADAPTOR
 ($ Call/email EMI)
 $ Call/email EMI
Hard Bottom Set
     HYDRAULIC POWER UNIT, HYDRAULIC
HOSES, DL-09  STANLEY U/W HYDRAULIC DRILL,
2-CB, ADAPTOR
 ($ Call/email EMI)
   
 $ Call/email EMI
Item
 Content
 (List Price)
 Set Price
Soft bottom
 HYDRAULIC POWER UNIT, HYDRAULIC HOSES, BR-67  
STANLEY U/W HYDRAULIC HAMMER, SGC-18, LL-1M
 ($Call/email EMI)
   
 $Call/email EMI
Item
 Content
 (List Price)
 Set Price
Hard and Soft Bottom
 HYDRAULIC POWER UNIT, HYDRAULIC HOSES

BR-67  STANLEY U/W HYDRAULIC HAMMER,
SGC-18, LL-1M, DL-09

DL-09 STANLEY U/W HYDRAULIC DRILL, 2-CB,
ADAPTOR
 ($ Call/email EMI)
 $ Call/email EMI
Item
 Content
 (List Price)
 Set Price
Hard and Soft Bottom
 HYDRAULIC POWER UNIT, HYDRAULIC HOSES

BR-67  STANLEY U/W HYDRAULIC HAMMER,
SGC-18, LL-1M, DL-09

DL-09 STANLEY U/W HYDRAULIC DRILL, 2-CB,
ADAPTOR

STANLEY HD-45 U/W Hammer drill, HD-45 drill steel,
ADAPTOR
 ($Call/email EMI)
 $ Call/email EMI
Standard EMI systems are designed for boats up to 55 feet in normal sea condition (up to six foot seas) for the area in which they are installed, if system is well maintained.  Boats have to
provide additional scoping line to system. (Please request information for customized systems for heavier loads)

LIABILITY  BOATERS:

USE AT YOUR OWN RISK ----  FAMILIARIZE YOURSELF WITH DOCKING AND TIE UP PROCEDURES ---- DO NOT LEAVE BOATS UNATTENDED

REEF PROTECTION BUOYS:

FOR DAY-USE ONLY ----  DO NOT REMAIN ON MOORINGS IN SEVERE WEATHER CONDITIONS

LIABILITY BUOY PROVIDER:

PROPER MAINTENANCE IS MANDATORY FOR THE SAFE USE OF SYSTEM COMPONENTS----BE SURE BOATERS KNOW HOW TO TIE UP PROPERLY TO MOORINGS ----
INFORMATION IS ESSENTIAL ----  SUBSTRATE HAS TO BE SOLID TO GET MAXIMUM POTENTIAL OUT OF MOORING EYE - SUBSTRATES MAY VARY---- CHOOSE THE
RIGHT LOCATION FOR YOUR MOORING ANCHOR SYSTEM
Proceed to next page